1. Install "Meatoid Pulse Stimulator.exe" and necessary drivers. The installation files will create a shorcut at desktop.
2. Double click the "Meatoid Pulse Stimulator" icon at the desktop.
3. After initialization of several seconds, you can see the APP interface. You'll have a 30-day free-tiral.
4. (1) Click the COM Port selection list, select the one showed "wch" and the APP will connect to this port.
(2) If you cannot see the port, check the driver installation or click the refresh button at the right of the selection list.
(3) After the first successful selection of COM port, the APP will store the COM port number and recover it the next time you open it. Normally, you don't need to select the port again in the future use.
5. Set the stimulation parameters by input the values. The Amplitude represents to one-phase amplitude (e.g. 15V output a ±15V biphasic pulse). Similarly, pulse width represents width of one phase pulse (e.g. 100ms pulse width output a positive 100ms pulse and a negative 100ms pulse). Duration represents the total stimulation duration.
6. Click "START STIMULATION" to start the pulse.
7. You can wait the stimulation to stop by the duration you set. Or, you can stop the stimulation in advance by click "STOP".
8. If you would like a license, click the licence button at the right of STOP button, copy or download your device ID and send to the local distributors. The distributors will send you a LICENSE_KEY. You could input in the LICENSE_KEY box and click "UPDATE LICENSE" to activate your license.
⚠️ Important Notice:
Always double-check all circuit connections carefully to avoid short circuits.